Видео

39kw at full load. £10 a hour in electric 😂 if it was running the full hour.

is it a synergic? as you said wasnt dip or spray

the torch you are using now is a binzel MB 15 AK, that torch has a max duty cycle of 60% at 180A on 85-15 argon/co2, try a MB 24 (240A) or a MB36 (340A) they can handle the power of the machine and are a bit more comfortable in the hand. the MB36 is the same size as your kemppi torch

Hi Arc one, I've been really impressed by your vids and your skills. Can I ask you what apprenticeship you personally did to get this good at pipe fabrication? I want to give it a try and I need to move on from working in kitchens

I have the older version 250K which is branded Unimig here in Australia in my shed at home. I also upgraded the torch from the standard SB24 BINZEL Style MIG Torch to a SB36 BINZEL and run an 81/16/3 argon mix and run 1.0mm ER70-S6, my heavy work welder is a 500-amp Kemppi X5 fastmig and my go to tig is a water cooled Fronius 230I ac/dc

superspatter i like the sound of that

Excellent video still really enjoy them and chance of a video like the 1st 1’s you used to do. Keep up the great work 👍👍

I got the 250 amp version, cracking machine. Was gonna buy a kemmpi or fronius as I'm slowly setting up a side business but the lad in the shop convinced me to try jasic stuff and for less than the money i was gonna spend on the more expensive brand welders i also got a small plasma, a wee suitcase arc welder and a watercooled acdc tig unit! I'll work my way up to be able to afford fancy equipment in time but ive driven the 250 pfc mig to the last trying to see will it overheat and I actually couldn't get it to! Very happy with their gear I must say

😂😂 yeah Homie I have that same gun on my 270 amp Vevor . I literally can’t stand the torch on that machine. I’ve been looking for a new one and really can’t decide.

Можно на позиционный вращатель поставить и заварить

The "super spatter". Thats a sign of globular transfer. Not dip transfer, not spray transfer, but in between the two. Any tradesman knows that. Where did you serve your apprenticeship? It isnt the torch. Even with 0.8mm, that little Jasic doesnt have the oomph behind it to get into a proper spray transfer.

Great video bud, i have the same issue with Ali, I always find having a decent down slope of about 3 seconds allows you to pulse the button near the end of the run. Keep up the great videos and awesome work. Best true to life welding content on RUclips.

Get a 250A or 300A Euro torch - they are much beefier

I guess they wanted to price it around 1500 pounds, so they skimped on a beefier gun. It attracts the pro-diy category and not so much the 'industrial 80+% duty cycle' category..

is that a 150 amp torch by chance ?

Nice video :D This machine looks like prime candidate for dual shield wire, for this type of work.

Nice job👍 my understanding to is the lines a sign of pen between two edges, some call it a wet line. Shame about the torch, The machine did great

Да. Это не Fronius. 😢 но мастерство на лицо!

Calvin, great review...im looking to buy the G5 01 but I wanted to ask if you ever feel there should be a gas and particle filter, rather than just particle filter, surely you need gas protection also? Thanks

Now that's a fitter/welder, I went through 4 years of apprentiship to learn that and that was after 2 years of welding school. All I'm saying is this man is a real craftsman. You don't learn this in a week or 2. Looks like good work man. Thanks for explaining your objectives. God bless, and work safe.

Can it handle occasionally welding 10 mm aluminum plates? We mostly do 1-8mm, sometime 10

So many fitter/welders just jam that flange in tight and weld it. Sometimes that may be ok but on code work I was taught to give it that 1/8" gap inside then weld it. I love that foot pedal. Good job man. God bless. Work safe.

I'm sorry but regardless of how good the weld looks to be I still strongly believe that TIG is a better option that gives you the best and more controlled results and there is no need to go over the top spending that much "crazy money for a good decent welding machine

DCEN would be used for 'Flux Core" wire with no gas.

Great content, you explain your processing well and good to watch a gun operator at play.

Great job mate

The Jasic EVO’s are great machines for the money The torch looks like an MB15 so is only rated for 150amps Stick an MB25 on there and that should stop the overheating torch issue 😁

hard to believe a professional welder cant tell when the polarity is wrong on a machine by the way it welds , to be fair a lot of those welds are very average at best.

Nice patch brother

Only a renter would weld in a home and not cover The carpet from sparks!!! OMG! You are a horrible renter!!!

Great video as always 👍👍

When you compare budget machines, I think you can't put Jasic in the same category as Parkside, Yeswelder, Arccaptain... not the same quality at all.

Hello, nice video as always :D One question, is that torch Abicor Binzel ? if it is, I am in shock.... that used to be ok brand...

I made the same mistake with wrong polarity several weeks back. I spent so long trying to dial it in before realizing.🤒

Jasic is a decent machine. Got the ac/dc tig 200 pulse machine. My only gripe is the little connector for the HF etc. Is a bit crappy

shame about the cheap torch. Gives a bad overall impression that Jasic don't really care. I guess you get what you pay for. My Fronius torch is like a tank. No chance of that melting. thanks for sharing your adventures.

Привет Брат как Ты

I've been welding in refineries for over 20yrs. Shop welding and on the job welding are worlds apart. You made it work so youre good.

Howmany your amp used?

What are those adapters you use on your bungs?

How to make those purge sponges bro

A little colder on the cap and it would be mint that pulse will fuse well as long as it's skimmed like you did great job buddy.

Sifu🙏🏼

You have to weld till flush then put cap

Looks like you did a good job all around to me....thanks

Nice work and thanks again for sharing the bits that you were not too happy about very helpful 👍

Thanks for the vid man, tomorrow ill be welding it for the first time on site so this helps a lot

Hi, your Kempi is a great machine. But my EWM Tetrix 300 AC/DC Comfort 2.0 Puls is much better😇 Greets from the Switzerland

Tack the patch properly, make sure there are no gaps before you weld

Nice work... Which rod where You using?